Bird-technologies 5000-EX Manuel d'utilisateur télécharger pdf (Page 23)

Installation

Directional Power Sensor (DPS)

Connect the Bird DPS to the “Sensor” port on the DPM

using the sensor cable provided.

Connect the DPS to the RF line so that the arrow on

the sensor points towards the load. The arrow on the

forward element should point towards the load. The

arrow on the reflected element should point towards

the transmitter. The forward element’s power rating

must be 10x the reflected’s rating. Both elements must

be either APM/DPM or 43 types, do not mix elements.

Wideband Power Sensor (WPS)

Connect the DPM port on the Bird WPS to the “Sen-

sor” port on the DPM using the sensor cable provided.

Connect the WPS to the RF line so that the arrow on

the sensor points towards the load.

 Note: The WPS is not compatible with the

Bird PCTool. Use the VPM software instead.

Refer to the VPM Quickstart for connection

instructions.

WARNING

RF voltage may be present in RF element socket.

Keep element in socket during operation.

Figure 4

DPS

Element

Orientation

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Pas de commentaire

Bird-technologies 5000-EX Manuel d'utilisateur Page 23