Bird-technologies 5010 Manuel d'utilisateur télécharger pdf (Page 3)

Element Contact Alignment

With continuous insertion or rotation of the element sensor, the

element contact spring may change position slightly within the

element socket. In some cases, this change of position may result in

intermittent contact with the element giving erratic power readings.

The position of the contact spring may be adjusted with a small

screwdriver in order to reestablish contact.

The design of the DPS provides the ability for easy adjustments of the

contact if it becomes necessary by following these steps:

1. Using a small flat head screwdriver, place the flat side of the

screwdriver behind the contact bar as indicated and bend the

contact bar so that the contact rests in the center of the slot

adjacent to the element socket.

CAUTION

If the element stops short of full insertion, do not force the element

into the socket. Damage to the element or the sensor could result.

1 2 3 4 5 6 7

Pas de commentaire

Bird-technologies 5010 Manuel d'utilisateur Page 3